fall arrester designed for work at height and rope access work. Compliant with EN 353-2, EN 12841-A/B standards and RFU 11.075 requirements for use on inclined and horizontal surfaces over an edge (r ≥ 0.5 mm).

main characteristics

  • it allows the safe ascent and descent along a vertical line, instantly locking in case of a fall;
  • the travel along the rope is facilitated by the shape of the adjustment lever, that is activated by the connector when pushed upward during the use;
  • equipped with a two-position adjustment wheel (Rest/Go) to be used to set the mode: in the ‘Go’ position the device travels freely along the rope and it locks in case of a fall; in the ‘Rest’ position the device may be manually blocked above the user to minimize the potential fall factor;
  • for the different possible configurations and the relevant work loads, please make reference to what indicated in the chart.
  • 200g in weight

 

(VCT2F714)

SKU VCT2F714
Brand CT
Unit Of Measure Each